3D Model	Overlay	Plan View
Column 1 PCB
ES09 PCB

Constructors should refer to the Component Overlays along with,
the Bill of Materials 3.5mm 4mm for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.

1. Assemble the 2x Jack Carrier boards
2. Fit all components to the boards except for J103, J104 and D202
3. Mount the Jack Carrier sub-assemblies but do not solder
4. Offer the assembly up to the front panel securing all panel components using the supplied nuts
5. Solder the Jack Carrier sub-assemblies in to place
6. Mount the Column 1 assembly
7. Connect the 2 column assemblies using the supplied IDC cable