3D Model	Overlay	Plan View
PCB

Constructors should refer to the Component Overlays along with,
the Bill of Materials 3.5mm 4mm for the current value of all components, and
the General Construction Notes for general PCB assembly guidelines.

1. Assemble the 2x Jack Carrier boards
2. Assemble the 1x Switch Carrier board
3. Fit all components to the main PCB except for the 3x sub-assemblies
4. Mount the sub-assemblies to the main PCB assembly but do not solder
5. Offer the assembly up to the front panel and secure using the supplied nuts and washers
6. Solder the sub-assemblies in to place