|
|
3D Model
|
Overlay
|
Plan View
|
|
|
|
|
|
|
|
|
|
|
Constructors should refer to the Component Overlays along
with,
the PCB Bill of Materials for the current value of all
components, and
the
General Construction Notes
for general PCB assembly guidelines.
-
Fit all components except J301 and J302 on the Lower PCB
-
Only fit J301 on the Lower PCB IF it is the ONLY PCB ie you are NOT using the Upper
PCB
-
When both boards are complete, fit J302 on to J401
-
Fit all the spacers and then offer the Upper PCB assembly to the Lower PCB assembly
guiding the pins of J302 in to its footprint
-
Solder J302 in to place
A wire link needs to be added as shown in the
overlay between the top pad of R10 and the top pad of
R115.
