Busboard Carrier Plate

From
Add to cart
  • Description

The Busboard Carrier Plate helps reduce the number of mounting points (8 down to 4) needed to be drilled in to the base of your enclosure when mounting any of our busboards. When mounting in to your own case you will need 4x  spacers (must be a minimum of 3mm) and 4x screws to suit an M4 hole.

The Studio Busboard Mounting Kit should be used for each busboard mounted in to one of our Studio System enclosures. It includes the Carrier Plate and ALL mounting hardware for a single busboard.

PLEASE NOTE: The Carrier Plate supplied as  just "Busboard Carrier Plate' i.e. NOT in the Studio Kit is NOT suitable for mounting in to our Studio enclosures nor the 84HP Tower