EuroSynth Specification

Signal Specifications - CV

These are DC Control Voltages and in this specification they are defined as being primarily positive polarity signals.

DC CV IN (BLUE)

  • The voltage range for DC CV IN signals is, typically, from 0VDC to +5VDC +/-10% when using a 'control CV' or from -2.5VDC to +2.5VDC when using a 'modulation CV'.
  • DC CV IN signals can extend in frequency from 0Hz to greater than 15kHz

DC CV OUT (GREEN)

  • The voltage range for DC CV OUT signals is from 0V to +5VDC +/-1%.
  • DC CV OUT signals can extend in frequency from 0Hz to greater than 15kHz

Typical CV Control

EuroRack-EuroSynth

EuroRack
EuroSynth
Modulation
-2.5V - +2.5V
Control
0V - 8V
Modulation
-2.5V - +2.5V
Control
0V - 5V


Email:  elby-designs@bigpond.com
© Copyright 2000. All rights reserved.     Revised: October 30, 2024