Let's Go Shopping

CGS576

Envelope Generator

Let's Go Shopping


3D Model

The CGS576 is an adaptation of the original Serge Envelope Generator from the early 'R' series.

Rise and Fall times are adjustable from 5mS to 20S. [CV] affects both rise and fall equally while retaining their temporal proportaion relative to each other.

The [START] input will initiate an envelope generator cycle. Applying a signal to the [HOLD] input will 'hold' the envelope at its current voltage.

[WINDOW SIZE] is a more intricate function. This is a pulse trigger output which can be set to occur at any point in a cycle according to the position of the [WINDOW SIZE] control or by a control voltage at the [WINDOW] input. This is a very useful function in obtaining a variable time delay between different envelope generators.

This is not an ADSR style generator and can be used as a voltage controlled LFO

PCB Dimensions: 2" x 6" with 3.2mm fixing points 0.15" from the edges
Power Consumption: +12V @ -12V @

Original article, art & design copyright by Ken Stone

Email:  elby-designs@bigpond.com
© Copyright 2000. All rights reserved.     Revised: July 2, 2021