Let's Go Shopping

CG522 V2.0
Resonant Equalizer

Previous Version

Let's Go Shopping

Click for 3D Model

The RESONANT EQUALIZER is a unique ten-band filter designed specifically for electronic sound synthesis and processing. Except for the top and bottom frequency bands, all other bands are spaced at an interval of a major seventh. This non-standard spacing avoids the very common effect of an accentuated resonance in one key, as would be the effect from graphic equalizers with octave or third-octave spacing between bands. Spacing by octaves will reinforce a regular overtone structure for one musical key, thereby producing regularly spaced formants accenting a particular tonality. The Resonant Equalizer's band spacing are much more interesting, producing formant peaks and valleys that are similar to those in acoustic instument sounds.

There are three equalized outputs, two which mix the alternate filter bands, and one which is a mix of all filter bands. The [UPPER] COMB mixes the frequency bands at 61 Hz, 218 Hz, 777 Hz, 2.8 kHz, and 11 kHz. The [LOWER] COMB mixes the frequency bands at 29 Hz, 115 Hz, 411 Hz, 1.5 kHz, 5.2 kHz.

This equalizer is different from other equalizers in that the bands can be set to be resonant. When the knobs are in the middle position, the response at the main [ALL] output is flat. When the knobs are positioned between the 9 and 3 o'clock position, up to 12dB of boost or cut is set at the band. If the knob is set beyond the 3 o'clock position, the band will become resonant, simulating the natural resonance of acoustic instrument formant structures. Below the 9 o'clock position, increased band rejection is achieved.

PCB Dimensions: 2" x 6" with 3.2mm fixing points 0.15" from the edges
Power Consumption:
+12V @
-12V @

Original article, art & design copyright by Ken Stone

Email:  elby-designs@bigpond.com
© Copyright 2000. All rights reserved.     Revised: October 20, 2022