|
Click for 3D Model
The CGS504 combines 2 functions in to a single module:-
-
Preamplifier
- for scaling external audio signals to EuroSynth audio levels
-
Envelope Detector - also known as an Envelope Follower and which extract amplitude
information from complex audio waveforms. The resulting dc voltage often drives non-linear
stages, such as voltage-controlled amplifiers or filters.
The Preamplifier accepts a wide variety of inputs:-Lo-Z In - accepts outputs from high-output
microphones in the range 200 to 1000 Ohms (such as most electret microphones), with a
sensitivity suited for close-miking applications such as instrument or voice pick-up.Hi-Z In -
accepts outputs from transducers such as guitar pickups and contact microphones. It is also
suited for amplifying low-level signals from tape machines, tuners etc.
Sensitivity for various microphones and audio sources can be adjusted over a very wide range
using the Preamp's [GAIN] control (but note, it will not cut the gain to zero).
The [Lo-Z OUT] & [Hi-Z IN] jacks will accept a standard shorting bar.
The switch in the DETECTOR section patches [PREAMP OUT] to [DETECTOR IN] bypassing any patch
conencted to [DETECTOR IN] .
|
