Let's Go Shopping
Dual Balanced Outputs
Let's Go Shopping



3D Model

This utility module converts an unbalanced AC output from your synth into a balanced output suitable for interfacing to external equipment such as a mixer or amplifier.

The use of balanced outputs negates possible ground loop problems and addresses the issue of connecting a synth with a floating power supply to external audio equipment with a grounded supply.

Two identical circuits are provided allowing for stereo applications.

It is quite feasible to integrate the CGS412 in to an existing module such as a mixer and bring the outputs out via the back of the boat and so negate the need to assign panel space to it.


PCB Dimensions: 1" x 6" with 3.2mm fixing points 0.15" from the edges
Power Consumption:
+12V @
-12V @
Email:  elby-designs@bigpond.com
© Copyright 2000. All rights reserved.     Revised: July 29, 2023