3D
Model
The CGS381 is a circuit for adding
and inverting control voltages. Full
processing control of 3 input voltages is
provided. A manual offset voltage can be set
using [OFFSET] to be added to the other three
inputs. You can use this module as a voltage
multiplier. Put your incoming voltage at
one of the inputs, then multiple off that
input to the next processor input to double
it.
Keep in mind that you can use this
module with no input voltages.
The [OFFSET] knob is handy for
driving one or more modules together as a
group, or for using negative bias to
voltage-control an oscillator into extra-low
territory.
CGS381
Tutorial By Nicholas
Peck At 'Under The Big Tree'
