3D Model
This is a "core" module for sequencer
type work. In its simplest form, it can be
used to select between different signal or CV
sources.
With a simple pot-based front end
and an external clocking LFO, it can be made
to function as a regular sequencer.
It is also possible to sequence
between constant and modulated signals, for
example, to enable vibrato to be placed on
every fourth note.
It can also count down, under
external control, allowing for some
interesting patterns to be produced with the
addition of an extra clocking LFO. It can
handle voltages in the range of +/-10v.
It is a multiplexor, i.e. not
bidirectional. It can route one of eight
signals to its output, but not the other
way around.
It can also provide independent gate signals
for each selected input.
