Let's Go Shopping

CGS389
Gate-Sequencer

Previous Version

Let's Go Shopping Return to WebTek
HOME

Programmer/Sequencer

The CGS389 is a sequencer designed for delivering pulsed or gated events, for rhythm and percussion, triggering other sequencers, or selecting stages in Programmers such as the CGS359 &CGS387.

The main function of the board is as a sequential pulse generator. When clocked by an external source, each of its outputs will come on one after the other. This can be used to sequentially trigger up to ten events. An example would be to set the number of steps to 2 by patching [OUT 3] to [RESET], then connect outputs [OUT 1] and [OUT 2] to two drum sound generators. A pulse train fed to the clock input would then produce a drum roll alternating between the two drum sounds.

When coupled with the CGS359/CGS387 rhythms of up to ten steps can be created.

Once you have a sequencer in your modular, you will wonder how you ever survived without it.

PCB Dimensions: 2" x 6" with 3.2mm fixing points 0.15" from the edges
Power Consumption: +12V @ -12V @

Original article, art & design copyright by Ken Stone

Email:  elby-designs@bigpond.com
© Copyright 2000. All rights reserved.     Revised: March 26, 2021