Tapped Strips & Rail Nuts

From
Add to cart
  • Description

Tapped Strips slide in to a dedicated slot near the front of the Rail and are used to accomodate module fixing screws and are tapped to take M3 or M2.5 module fixing screws. The design of the Tapped Strip allows them to be end-stackable to make longer lengths than the standard 84HP length without loss of the 1HP spacing.
NB: 2 pieces are required for each 3U section of rack.

If you need to mount modules that use non-standard 'HP' spacing or need to mount only a couple of modules, then our M3 Square Rail Nut are the ideal alternative to full length Tapped Strips. Each M3 Square Rail Nut is a 1HP Tapped Strip that simply slides in to the slot on the rail and can be positioned where you need it.

Our Tapped Strips and Rail Nuts are compatible with Schroff 'threaded inserts'