PSU-6 5V Supply Unit

Some modules not only require a 5V supply but also place a high loading demand on the 5V rail at power-up (inrush current).
The PSU-6 can deliver up to 3A at power on with a recommended steady-state loading of around 1.5A.
This high loading capacity makes it eminently suitable for driving modules from the Metasonix R Series.

Power is derived from the main incoming +15V supply so does not affect the main +/-12V supply
although it can be connected to the +12V rail assuming the +12V supply can handle the resultant loading.

Dimensions
96mm x 86mm
Bill of Materials
Construction
Guide
Installation

Email:  elby_designs@ozemail.com.au
Copyright 2000. All rights reserved.     Revised: December 21, 2016