The ED702D is a single-channel oscilloscope ideal for monitoring signals in your system.

The DataLogger section at the top of the screen displays:-

• Vpp - Shows the difference between the exteme Maximum and Minimum values Vavr - The Average reading is the mean vertical level of the entrie captured waveform
• Freq - The Frequency is the inverse of the Period and is measured in Hertz

Pressing the [SELECT] button steps the user through the various control settings displayed around the edge of the screen, the currently active setting being highlighted within a blue frame. At each setting, pressing the [-] and [+] buttons will step through the available options.

Pressing the [HOLD/OK] button will freeze the current display allowing for closer inspection of the input signal.

Pressing the [HOLD/OK] button while in the lower left corner of the screen, the user can toggle the [AUTO SIZE] ([A.S]) function on and off. When enabled, [A.S] will automatically resize the input signal to fill the scope display area. This is useful when you have a signal on the display which doesn't optimally fit in any of the [VOLTS/DIV] settings. The DataLogger still displays the correct data for the input signal.

The [INPUT] lets you switch between the 2 input channels.

ED702D mounted in a 5U sub-rack.

See the User Guide for additional operation information.

This 5U DotCom version adds a Pedal Interface based on the DotCom Q142 providing a mechanism for controlling your synth using a pedal (either switches and/or variable potentiometer).

User Guide