|
Pixie under construction |
This page contains some information on the suggested construction of the Pixie
 |
A suggested panel layout to suit a medium-sized attache case |
 |
The fully dressed pcb mounted in to the case ready for wiring. |
 |
A closer view of the U-bracket used to mount the front panel . |
 |
Front panel wired up and loomed. |
 |
Wire loom connected to the PCB. |
 |
Fully assembled unit in its attache case open for inspection |
 |
How the finished unit looks |
|
Pixie
enhancements over the EDP WASP
|
|
Supports
a 48-note keyboard
|
|
External
input for BEND control
|
|
Mixer
input for External audio signal
|
|
MIDI
Interface
|
|
VCF1
and VCF2 filters include a NOTCH mode and DISTORTION mode (courtesy
of J. Haible)
|
|
Dual
filters offer 24dB modes of operation
|
|
External
input for voltage control of Filter
|
|
Mixer
control of VCO1, VCO2 and NOISE
|
|
24-bit
NOISE generator module (courtesy of Scott Gravenhorst)
|
|
Includes
a Moog-styled diode-ladder filter (VCF3)
|
|
Includes
a Ring Modulator
|
Some sample sound files