The MIDI-IFE Interface Unit allows
you to connect and control your MIDI device(s) from any computer
equipped with an RS232 port and suitable application software.
An example being our MIDI3c software running on the Psion
Series 3c, Series 3mx and WorkAbout mx palmtop computers.
This unit is also available fully
assembled and tested.
This unit support 38,400 (default)
or 57,600 baud and works well with the Yamaha
CBX Serial driver.
Technical Specification for MIDI-IFE
configured for Psion/Palm
| Dimensions |
120mm (w) x
60mm (d) x 30mm (h) |
| Controller Input |
DB9M suits PsiWin
cable for Series 3c, Series 3mx and WorkAbout and most
other palmtop computers |
| MIDI Output |
Standard 5-pin
DIN plug wired as a MIDI-OUT connector |
| Power Requirements |
9V - 15VDC @
100mA. Fitted with 2.5mm DC socket (positive tip) |
Technical Specification for MIDI-IFE
configured for PC
| Dimensions |
120mm (w) x
60mm (d) x 30mm (h) |
| Controller Input |
DB9F suits standard
PC serial cable |
| MIDI Output |
Standard 5-pin
DIN plug wired as a MIDI-OUT connector |
| Power Requirements |
9V - 15VDC @
100mA. Fitted with 2.5mm DC socket (positive tip) |
Latest MIDI-IFE.MOT
file
Schematics
Block
Diagram
Main
Control section
Power
Supply
