Studio End Cheeks

  • Description

These white End Cheeks let you complete your system enclosure providing you with a high-quality, tough and aesthetically pleasing finish. End Cheeks are 19mm thick, made from a solid thermoplastic material, and simply bolt on to the systems End Plates using the supplied fixings.

The Studio 500 End Cheeks are 85mm at the front edge and provide a sloped face of 22 degrees from the horizontal. 
The Studio 500 Tower End Cheek can be used in the vertical orientation to form a sloped/vertical tower combo (2) or laid on its back to form a desktop/sloped tower combo (3). In the vertical orientation the Desktop unit (1) can be fitted in front to create a full 18U system.

End Cheeks for the Studio 300 and Studio 700 provide not only an aesthetic finish but allow the systems to have lids fitted