m3-nylon-bolt
Module Fixings & Blank Panels
!

Blank Front Panels

Fill those empty spaces in your rack or make your own front panel. These high-quality aluminium panels are the ideal solution.

Polycarbonate Bolts

M3 Polycarbonate Bolts (now supplied with all Panther modules) are an excellent alternative to metal bolts virtually eliminating `rack burn'.
6mm bolts suit systems using Doepfer rails while 10mm bolts suit our Construct-A-Rack rails
screw-pan

Stainless Steel Bolts

Regular metal bolts used for securing modules in to sub-racks.
6mm bolts suit systems using Doepfer rails while 10mm bolts suit our Construct-A-Rack rails

M3 Nylon Washers

Use these with M3 metal bolts to help reduce `rack burn'
thumbscrew

Construct-A-Rack Thumbscrews

Thumbscrews offer an excellent `quick-fit' alternative to bolts. Ideal for those wishing to regular change module positions. The head of the thumbscrew incorporates a flat-blade screwdriver slot.
M3 and M2.5mm variants are offered. Only fits Construct-A-Rack rails
rail-nut

M3 Square Rail Nut

If you need to mount modules that use non-standard 'HP' spacing or need to mount only a couple of modules, then our M3 Square Rail Nut is the ideal alternative to full length Tapped Strips. Each M3 Square rail Nut is a 1HP Tapped Strip that siply slides in to the slot on the rail and can be positioned where you need it.