|
ASM2-Genie Bill Of Materials |
The following lists items
required in addition to the ASM-2 PCB and Component kits to build the
ASM2-Genie.
This is still a design in progress so readers should use this as a guide.
|
Qty
|
Part Type | Description |
|
4
|
10K | 25T Multiturn Trimpot |
|
12
|
10K | 0.5W 1% Metal Film Resistor |
|
4
|
62K | 0.5W 1% Metal Film Resistor |
|
8
|
1M LN | Single-gang Linear Potentiometer |
|
1
|
50K LG | Single-gang Logarithmic Potentiometer |
|
2
|
100K LG | Single-gang Logarithmic Potentiometer |
|
39
|
100K LN | Single-gang Linear Potentiometer |
|
55
|
Knob | 16mm or 20mm Knob to suit potentiometers |
|
2
|
KCV IN/GATE IN | Mono Switched Jack Plug |
|
2
|
KCV OUT/GATE OUT | Mono Jack Plug |
|
2
|
VCA1 OUT/VCA2 OUT | Mono Jack Plug |
|
5
|
LED | 5mm LED |
|
5
|
LED Clips | 5mm Panel Mount unless using LEDs supplied with panel mount option |
|
1
|
SW-1P3W | Rotary Switch 1P3W |
|
2
|
SW-1P4W | Rotary Switch 1P4W |
|
2
|
SW-1P6W | Rotary Switch 1P6W |
|
14
|
SW-SPDT | Single-pole, Double-throw Switch |
|
1
|
SW-DPDT | Single-pole Single-throw Switch |
|
1
|
SW-DPDT | Double-pole, Double-throw Switch Centre-off (ON-OFF-ON) |
|
1
|
MIDI-CV | MIDI-CV Unit with connectors |
|
1
|
RAW-DC | Pre-regulator power supply |
|
1
|
Transformer | 18-0-18 @ 500mA per secondary |
|
1
|
POWER | Switch and/or Fused Mains Power Inlet |
|
1
|
CASE | Aluminium Attache/Camera Case 450mm(W) x 320mm(H) x 145mm(D) |
|
1
|
PANEL | ASM2-Genie Front Panel |
| HARDWARE | Nuts, bolts and washers, spacers etc | |
| WIRE | Hook-up wire and single-core screened wire |
For components to fit the ASM2-Panel:-
1) Potentiometers have standard
imperial shafts (1/4" round or D-type) with a threaded bush suitable
for a 7mm mounting hole
2) Toggle switches are standard miniature type with threaded bush suitable
for a 6.5mm mounting hole
3) Rotary switches have standard imperial shafts (1/4" round or
D-type) with a threaded bush suitable for a 10mm mounting hole
4) Jack plugs are not mounted on the ASM-2 panel so may be user selected
5) MIDI DIN plugs are not mounted on the ASM-2 panel so may be user
selected